DashHawk
 

Quarter mile playback
Realplayer required

 
0-60 playback
Realplayer required
 

 

 

 

 

 

 

 

Special thanks to
Tiny for truck data

The DashHawk is a invaluable tool that can be used to check up on your custom tune and do the following major functions by simply plugging into your OBDII port.

  • Monitor vehicle data from 2 to 7 PIDs (see pids) at a time all configurable via the DashHawk or the PC.
  • Do a crank relearn (required when you install new ECM)
  • Read trouble codes in the same manner as the dealer and clear them.
  • Do performance testing both zero to 60 and quarter mile.
  • Set alarms for various parameters.
  • Datalog 5 PIDS and download to your PC for close inspection.

For a quick run down of the feature watch the DEMO

Its not uncommon to have issues with some of the mail order tunes available for the TBSS because of fueling problems or excessive timing. For that matter, it's not that uncommon to have the same issue with a vehicle that's been professionally dyno tuned. The DashHawk is an easy way to get to the bottom of performance problems. See the "How do you know if your tune is working?" section on this site

How does it compare to the Aeroforce?

 
DashHawk
Aeroforce
Simple OBDII connection
Yes
Yes
Case realearn capable
Yes
Yes
Control aftermarket E-fans
Yes
Yes
Performance Testing (0-60 & 1/4 mile)
Yes
Yes
Visual Alarms
Yes
Yes
Audible Alarms
Yes
No
Analog Inputs (wideband, etc)
In Development
Yes
Standard gauge mounting
No
Yes
Parameters for TBSS that can be read
100+
Approx 55
Color Display
Yes, user configurable

Yes, choose at
time of Order

PIDs that can be displayed at one time without scanning
7
2
Read and clear trouble codes
Yes
Yes
Connect to PC and read logs/performance stats
Yes
No
Number of configurable screens that you can toggle between
11
1
Configure via PC
Yes
No
Upgradable/Cost
User via included
PC software/Free
Send back to
Factory

Note some PIDS may be redundant or "similar". Actual count may vary.

 

 

   
 

tbssowners